Air Filter PU Injection Gluing Machine Filter Glue Adhesive

• Customization: Available
• CAS No.: 12237845
• Formula: 18-23
• Model NO.: Sun Hong
• EINECS: 55345678
• Bonding Function: Filter Element
• Morphology: Water-Soluble
• Application: Filter Element
• Material: Glue
• Classification: Hot Melt
• Main Agent Composition: Polyurethane Elastomer
• Characteristic: Weatherability
• Promoter Composition: Filler
• Composition: Organic Material
• Color: Clear
• Transport Package: Wooden Case
• Specification: Make to order
• Trademark: Sun Hong
• Origin: China

Product Description

PU Adhesive Glue

PU adhesive is an elastic material that produces filter end caps by pouring. This eliminates the need for the iron end cap and rubber sealing ring of the air filter element, and is also the most ideal product for producing plate type air filters.
 

Physical & Chemical Performance

Material A:
Appearance: Uniform orange red liquid (other colors can be configured as needed) PU rubber filter cartridge | PU filter cartridge
Density: 1.02g/mg
Viscosity: 800-1000MPa S(25ºC)

Material B:
Appearance: Brown yellow liquid
Density: 1.27g/ml
Viscosity: 25-50MPa S(25ºC)

How to use it
 

1. Mix material A evenly with a handheld drill before using glue every day, and shake material B.
2. Turn on the electric heating plate and adjust the temperature to 40-50 degrees. Preheat materials A and B in small containers during winter.
3. Wipe the mold with release agent.
4. Mix materials A and B in a ratio of 100:40, add 40% talc powder, and stir the mixed adhesive solution with a 2800 rpm motor. The stirring time is determined by the amount of adhesive, with approximately 7-10 seconds per 100 grams of adhesive.
5. Pour the evenly mixed liquid into the mold, then place the paper core and apply pressure.
6. Demould in 10 minutes.

Heat Curing Adhesive 

Suitable for bonding paper cores and metal end caps of filters such as internal combustion engines. (Air filter, oil filter, oil filter, fuel filter, etc.)
 

Features
1. It has strong adhesion to metal end caps, and the cured adhesive layer has good water and oil resistance. Temperature resistance. Aging resistance performance.
2. It has a wide range of process adaptability and can adapt to heating in drying ducts or ovens. It is also suitable for bonding and curing both ends together to improve production efficiency. (Both machine injection and manual injection are acceptable)
3. Long storage period without deterioration or sedimentation or clumping.

 

Technical Parameter
1. Uniform appearance and viscous liquid (color can be changed according to customer requirements)
2. Density 3 1.5 ± 0.2 g/ml
3. Viscosity 3.000-50.000 MPa. s
4. Non volatile matter content ≥ 98%
5. Curing conditions: 160 ºC -180 ºC 12-20 minutes
6. Tensile shear strength (steel steel): Normal ≥ 10kg/cm2
7. Tensile strength.

Hot Melt Adhesive

Hot melt adhesive are mainly used as a support in the assembly stage and to bond filter paper. A further use is bonding of filter folds to form so-called (pocket filters) which are used mainly used for air filters.

 

Technical parameters

Appearance: translucence and yellow glue stick or granule
Softening point: ≥100±5ºC (Circular Ball Method)
Melting viscosity:≥13pa.s
Opening time:15~20s
Hardening time:10~15s
Operating temperature:160ºC~180ºC
Shear strength:≥300N/cm
Peel strength:≥20N/cm
Toxicity:no

Our Factory

We provide all kind of adhesive glue for filter element:PU Adhesive glue, hot melt gule, heat curing glue,etc

We can provide various material and equipement for making oil filter, air filter, fuel filter, cabin air filter, hydraulic filter,etc.
Welcome to contact us to get more details