Full Auto Seal Leakage Tester
This machine is used to check the sealing performance of the spin-on filters.
1. feeding sorting, robotic clamping, turning into the water test, robotic disassembly, finished product output, fully automatic without manual operation;
2. NG rejection: manual observation of the product into the water with or without leakage, if there is any abnormality manually give a signal to the station equipment automatically kicked off the defective products;
3. product mounting fixtures: according to the size of the product customized to achieve a convenient replacement;
4. Product clamping mode: fully automatic robot clamping, one time clamping 8pcs.
5. Change time: no diameter change, only change the thread of the head, less than 5 minutes; change the diameter + change the thread of the head, less than 10 minutes.
8 Station Seal Leakage Tester
This machine is used to check the sealing performance of the spin-on filters.
1. This machine is a machine, electricity, gas integration of equipment, compact, easy to operate, can automatically complete a work cycle;
2. The host is made of stainless steel 304, vertical leak detection, with a small size, more workstations and other advantages;
3. The different threads of the product, the machine can be replaced by replacing the tooth head connector and special sealing ring, so as to achieve the detection of different types of filter sealing performance, replacement is fast and convenient;
4. Machine testing process in the water after inflation for slow rotation, in order to observe the product leakage;
5. Power using servo motor rotation, loading and unloading of products, pneumatic tensioning, pressure water testing action mode.
4 Station Seal Leakage Tester
This machine is used to check the sealing performance of the spin-on filters.
1. This machine is a machine, electricity, gas integrated equipment, compact, easy to operate, can automatically complete a work cycle.
2. The whole host is made of stainless steel 304, horizontal leakage detection, with automatic clamping, automatic dismantling function.
3. The different threads of the product, the machine can be replaced by replacing the tooth head connectors and special seals, so as to achieve the detection of different types of filters sealing performance, replacement is fast and convenient.
4. The action of the machine head is left up and right down action mode, there are always two stations in the water for testing, improve efficiency, can also be two sets of leakage detection mechanism together with up and down at the same time action.
5. The machine rotates slowly after being inflated in the water during the testing process in order to observe the product leakage.
Technical parameter
| Capacity |
22000/10h |
| Air Pressure |
0.8 Mpa (Adjustable) |
| Test Outer Diameter |
55~102mm |
| Test Height |
60-130mm |
| Motor Power |
0.55KW 380V |
| Weight |
430kg |
| Dimension |
1030*650*1900mm |
Equipment for Making Oil Filter
We can supply all the oil filter making machine for you.
Audited Supplier 
){kind=link}