Sun Hong Oil Filter Product Structure Product Function Product Process 1.Stamping. Stamping refers to the stretching of the casing, the stamping of the threaded plate and the sealing plate, in addition to the stamping of the upper and lower end caps of the oil filter element. 2. Production of filter paper. This step is very critical because it ensures that the product filtration area can meet the performance requirements. The filtration efficiency is high and the flow resistance is small, so that the oil can be supplied to each component that needs lubricating oil in time. 3. Filter paper clips. The operation requirements of filter paper production are very high. After the filter paper production is completed, the marked model must be confirmed, and then the filter paper is put into the clamping strip. There should be no looseness between the filter paper and the clamping strip.
4. Upper end cap. The material of the end cover also has certain requirements. It must be ensured that the filter element and the flange are concentric and cannot be offset, and the check valve must be installed effectively and correctly. 5. Aprons. The rubber ring is mainly for better sealing performance. This process requires setting the oven temperature, and checking whether the product is sticky after baking, etc. 6. Assembly. The assembly process is not as simple as everyone thinks. Generally, it is a dust-free workshop. The purpose is to control the air cleanliness and temperature and humidity that the product comes into contact with. 7. Detection. After all the processes are completed, the product should be further tested to see if there is side leakage, and the cleanliness and sealing performance of the product should be guaranteed.
8.Packing. Element for Oil Filter
Why do you need to change the oil filter regularly? Keep Improving Packing & Shipping