Air Filter Inner & Outer Mesh Making
The mesh hoel punching machine is used for making the inner and outer mesh of the air filter.
The expanded metal mesh is made of high-quality carbon steel plate stretched by a steel mesh punching and shearing machine, and the surface treatment adopts a galvanizing process. It is an important component of filters for inner supporting and outer protection.
Main Features
1.The machine is equipped with single materials feeding system, which fed correctly and easy to adjust the length.
2.Auto-cut according to set length.
3.Different rhombus net produced by changing blades.
4.High speed drawing machine with high efficiency, steady property and easy operation.
Application
Specification
The punched hole size and type can be customzied
| Model |
SHPM-600 |
Eccentricity of shaft |
12mm |
| Width |
≤600mm |
Motor power |
2.2kw |
| Thickness of sheet |
0.3-1mm |
Power supply |
380v |
| Speed |
200pcs/min |
Max. stroke |
≤10mm |
Air Filter
Air filter is a type of filter mainly used for air filtration in vehicle engines. The engine needs to suck in a large amount of air during operation. If the air is not filtered and the suspended dust in the air is sucked into the cylinder, it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause serious cylinder pulling, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the cylinder.
Air Filter Making Process
1. Inner & Outer Mesh Making
The first step is to make the inner and outer mesh of the filter. used as inner support mesh or outer protective mesh of truck air filter, car air filter, eco fuel and oil filters and hydraulic filters.
2. Filter Paper Pleating
This process need the knife pleating machine to fold the filter paper. It consists of multiple parts such as feeding, folding, cutting, and forming. The folding section folds the filtering medium to form a certain width, the cutting section cuts the folded filtering medium, and the forming section shapes the cut filtering medium.
3. Gluing the end cap with the filter paper
Use the gluing machine to gluing the air filter cap with the paper. Generally use the PU adhesive glue. we can provide different type of plastic molds.
All the Air Filter Making Machine Machine we can provide for you. And We also have strong technical team to help you design and set up your machine and factory. If you have interest or need any help , please contact us.
Our Factory
Audited Supplier 
){kind=link}
){kind=link}