Toyota Honda Car Truck Bus Air Filter Element with Making Machine

• Customization: Available
• After-sales Service: Technical Support
• Warranty: 1 Year
• Type: Cutting Plate Machine
• Application: Air Filter/ Air Condition Filter
• Condition: New
• Adjustable: Yes
• Design Solution: Included
• Transport Package: Standard Wooden Case
• Specification: make to order
• Trademark: Sun Hong
• Origin: China

Product Description

Air Filter

Air filter is a type of filter mainly used for air filtration in vehicle engines. The engine needs to suck in a large amount of air during operation. If the air is not filtered and the suspended dust in the air is sucked into the cylinder, it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause serious cylinder pulling, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the cylinder.

Panel Air Filter Making Process

1.Filter Paper Pleating

This process need the knife pleating machine to fold the filter paper. It consists of multiple parts such as feeding, folding, cutting, and forming.  The folding section folds the filtering medium to form a certain width, the cutting section cuts the folded filtering medium, and the forming section shapes the cut filtering medium.

 

2. PU Frame Molding & Air Filter Assembly

This process need PU glue injection machine to pour PU for auto air filter and industry filter. The machine designed with X-Y axial square revolving working table which can not only pour square seal pack, but also round and special seal pack.Plastic molds and PU adhesive can be buy separately.

3. Air Filter Gluing

It need the Panel air filter gluing machine.It used for dispensing hot melt lines on the surface of the panel air filter.

4. Air Filter Curing

This process is to dry the air filter to make it structure solid. It adopts the rotating disk drying, the machine cover an area of an area small, feeding and unloading material more convenient.

5. Frame Trimming

This process is for trimming of PU end cover or sealing gasket of PU air filter.

6. Printing & Finished

You can print on the cartridge as desired.And also can according customers requirement to full-sealing heat shrinkable film of air filter, square air filter and other filters.

Air Filter for Bus / Truck / Car

1. Inner & Outer Mesh Making

The first step is to make the inner and outer mesh of the filter. used as inner support mesh or outer protective mesh of truck air filter, car air filter, eco fuel and oil filters and hydraulic filters.

2. Filter Paper Pleating

This process need the knife pleating machine to fold the filter paper. It consists of multiple parts such as feeding, folding, cutting, and forming.  The folding section folds the filtering medium to form a certain width, the cutting section cuts the folded filtering medium, and the forming section shapes the cut filtering medium.

3. Gluing the end cap with the filter paper

Use the gluing machine to gluing the air filter cap with the paper. Generally use the PU adhesive glue. we can provide different type of plastic molds.

4. Assemble & Finished

All the Air Filter Making Machine Machine we can provide for you. And We also have strong technical team to help you design and set up your machine and factory. If you have interest or need any help , please contact us.


Our Factory